Kingston DDR3 12Gb 1600MHz HyperX T1Black Series 3X4G CL9

Kingston DDR3 12Gb 1600MHz HyperX T1Black Series 3X4G CL9

Video Kingston DDR3 12Gb 1600MHz HyperX T1Black Series 3X4G CL9

Consigue aquí la tarifa especial para distribuidores y tiendas de informática.

Caracteristicas y Especificaciones de:

Kingston DDR3 12Gb 1600MHz HyperX T1Black Series 3X4G CL9

Modelo: KHX1600C9D3T1BK3/12GX  Stock: 1-9

Precio de Venta
89.90 €
Portes 24-48 horas
3.99 €
Seguro de transporte e IVA incluidos.
COMPRAR

KHX1600C9D3T1BK3/12GX
12GB (4GB 512M x 64-Bit x 3 pcs.) DDR3-1600MHz
CL9 240-Pin DIMM Kit


DESCRIPTION:
Kingston's KHX1600C9D3T1BK3/12GX is a kit of three 512M x 64-bit (4GB) DDR3-1600MHz CL9 SDRAM (Synchronous
DRAM) memory modules, based on sixteen 256M x 8-bit DDR3 FBGA components per module. Each module kit
supports Intel® XMP (Extreme Memory Profiles). Total kit capacity is 12GB. Each module kit has been tested to run at
DDR3-1600MHz at a low latency timing of 9-9-9-27 at 1.65V. The SPDs are programmed to JEDEC standard latency
DDR3-1333MHz timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers and requires +1.5V. The JEDEC
standard electrical and mechanical specifications are as follows:

FEATURES:
JEDEC standard 1.5V ± 0.075V Power Supply
VDDQ = 1.5V ± 0.075V
667MHz fCK for 1333Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 5,6,7,8,9,10
Posted CAS
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
Programmable CAS Write Latency(CWL) = 7(DDR3-1333)
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4
which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
Asynchronous Reset
PCB : Height 2.401” (61.00mm) w/ heatsink, double sided component

PERFORMANCE:
CL(IDD) 9 cycles
Row Cycle Time (tRCmin) 49.5ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin) 160ns
Row Active Time (tRASmin) 36ns (min.)
Power 2.225 W (operating per module)
UL Rating 94 V - 0
Operating Temperature 0o C to 85o C
Storage Temperature -55o C to +100o C